Proceedings of first National Aero-Mech Conceptual Design Competition

Aero Mech Design Competition 2020


  • Karan Kumar Shaw SRM Institute of Science and Technology
  • Shivam Bhanderi Chandigarh University
  • Mohan Kumar V KCG College of Engineering
  • Aarohi Anmol Mudholkar SRM Institute of Science and Technology
  • Ajit Kumar Chetry Chandigarh University
  • Adhiyaman M Madras Institute of Technology
  • Karanveer Singh Chandigarh University
  • Himanshi Chandigarh University
  • CH.R.Chyandramohan Reddy Hindustan Institute of Technology and Sciences
  • Dhariya Chandigarh University
  • Lokesh T Er Perumal Manimekalai College of Engineering and Technology
  • Nitesh Kumar Verma SRM Institute of Technology
  • Pon Maa Kishan A Chandigarh University
  • Aishwarya Dhara Chandigarh University


Sustainable Propulsion System, Airship, Flying Ambulance, Bharatiya space station, flying rover, Electric Blue Bird, Engine inside a wheel, hellfire missile, V-HTOL aircraft, bio-mimicry, modular Moon Mars rover, Tactical missile, unconventional RC aircraft, Multi Nozzle Hydro Rocket, Dhartimaa, Zekrom rover, Supersonic Surface to Air Missile, Wind Tunnel


During COVID 19, Department of Aerospace Engineering, Chandigarh University has organized the 1st National Level AERO-MECH Conceptual Design Competition 2020 to enhance the design skills of students belong to Aerospace engineering and Mechanical engineering.

Coordinators: Ajin Branesh, Pon Maa Kishan and Aishwarya Dhara.

Over 30 designs from all over India have been submitted under various categories which includes Automotive Vehicle | Aircraft or Glider, Rocket | Wind Turbine, Space Shuttle | Rovers, Space Capsule | Space Station, Satellite | UAV – Drone, Flying Suit | Airship, IC/Gas Turbine/ Alternative Engine, Wind Tunnel | Missile. The event is organized in three different phases from shortlisting the innovative abstracts, plagiarism check, presentation and then final judgement of winners. Although 30 concepts have been submitted, only 18 articles are accepted for the publication in the proceedings.

The following are the winners of 1st National Aero-Mech Design Competition,

1] Karan Kumar Shaw – SRM Institute of Technology | Conceptual Design of unconventional RC aircraft.

2] Shivam Bhandari – Chandigarh University | Design and Development of V-HTOL aircraft with tilt rotor and split wing mechanism.

3] V Mohan Kumar – KCG College of Engineering | Design of a Supersonic Surface to Air Missile (SAM) with a small nose bluntness to provide structural integrity.

Special Thanks to
Dr. Dharmahinder Singh Chand, Head – Aerospace | Chandigarh University
Dr. S.S. Sehgal, Registrar - Chandigarh University


Metrics Loading ...


Tactical Missile Design by Eugenne. L. Fleeman

A. K. Chetry, “Experimentation of world’s largest hydro rocket: world’s largest hydro rocket”,J.Mech.Aero.Research, vol. 2, no. 3, Apr. 2020.

A. Saroj, A. S, S. Kumar, and J. A. . Packiyaraj, “E-Sail Making Unreachable to Reachable: Deployment Mechanism: E Sail”, J.Mech.Aero.Research, vol. 2, no. 2, Dec. 2019.

O. Tyagi, “Design and analysis of solar UAV: Solar UAV",J.Mech.Aero.Research, vol. 2, no. 2, Dec. 2019.

G. N. S and D. S. Chand, “Coarse Wall Influence on Supersonic Diffuser – A Computational Analysis: CFD - Supersonic Diffuser”,J.Mech.Aero.Research, vol. 2, no. 2, Dec. 2019.

A. B. A, “CFD Analysis of controlling the airflow over airfoils using dimples: Dimple Airfoil”,J.Mech.Aero.Research, vol. 1, no. 5, Aug. 2018.

Aishwarya Dhara, “Theoretical review of inevitable horizon in space: Inevitable horizon”,J.Mech.Aero.Research, vol. 1, no. 4, Apr. 2018.

Aishwarya Dhara, “Theoretical overview of atmosphere and its phenomenal change:Atmosphere”,J.Mech.Aero.Research, vol. 1, no. 3, Dec. 2017.

S Ramesh Subramaniam, T Gowthami, M Mahalakshmi, and S M Jannathul Firthouse, “Estimation of runway length for the two stages to orbit vehicle: TSTO Runway Length”,J.Mech.Aero.Research, vol. 1, no. 2, Aug. 2017.

Jini Raj, “CFD analysis of flow characteristics of NACA0012 airfoil using SU2: SU 2”,J.Mech.Aero.Research, vol. 1, no. 3, Dec. 2017.

V. V. Shukla and K. N. TK, “Modeling & Identification of High Performance Aircraft in Frequency Domain: Identification of High Performance Aircraft”,J.Mech.Aero.Research, vol. 1, no. 1, Apr. 2017.

Jini Raj, “Review of variable camber morphing wing: Variable Camber”, J.Mech.Aero.Research, vol. 1, no. 1, Apr. 2017.

Aishwarya Dhara, Pon Maa Kishan A, “Aircraft Design Guidelines for Freshmen”, WINGS OF AERO, Edition 1, 2019.

Aero Mech Design 2020




How to Cite

K. K. Shaw, “Proceedings of first National Aero-Mech Conceptual Design Competition: Aero Mech Design Competition 2020”, TEMSJ, vol. 2, no. 4, Aug. 2020.